Справочник Пользователя для VIZIO TL-R480T

 

In this section, we’ll introduce how to install and configure the TCP/IP correctly in 
Windows 95/98. First make sure your Ethernet Adapter is working, refer to the adapter’s 
manual if needed.   

1)  On the Windows taskbar, click the Start button, point to Settings, and then click 

. 

2) Double-click 

the 

 icon, click on the Configuration tab in the appearing 

window.  

3)  Click on the Add button. Select Protocol, and then click Add. 

 

Figure B-1    Add Network Protocol 

4) Under Manufacturers on Select Network Protocol page, highlight Microsoft. 

Under Network Protocols, highlight TCP/IP. Click OK. TCP/IP protocol will 
take effect after reboot. 

 

Figure B-2    Select Network Protocol 

1)  On the Windows taskbar, click the Start button, point to Settings, and then click 

. 

2) Double-click 

the 

 icon, highlight the bound TCP/IP tab in the Network 

window that appears. An example is shown in the following figure: 

 

- 49 -