Справочник Пользователя для Polycom Battery Charger 5040

Polycom, Inc. 

11 

Polycom Kirk 5020-5040 User Guide

Getting Started 

 

á

Place handset in charger. 

For correct charging, be sure the room temperature is between 0°C/32°F and 

40°C/104°F. Do not place the handset in direct sunlight. The battery has a 

built-in heat sensor which will stop charging if the battery temperature is too 

high.
If the handset is turned off when placed in charger, nothing indicates the 

charging. There will be no reaction on incoming calls.
If the handset is turned on when charging, the display shows the blue charging 

icon 

 in the status bar. The charging icon is replaced by the green fully 

charged icon 

, when the battery is fully charged (when handset is removed 

from charger, the charging icon disappears). The handset will not vibrate. Auto 

answer is inactive. The handset reacts normally for incoming calls.
It is necessary to recharge battery when display shows the battery low icon 

, 

or if the handset cannot be turned on. 

Battery Capacity 

The capacity of the battery depends on the use of backlight and talk time. 
Battery capacity in active mode:
• 5020: up to 20 hours of talk time. 5040: up to 15 hours of talk time.
Battery capacity in standby mode:
• 5020: 200 hours when display backlight is turned off. 5040: 100 hours when 

display backlight is turned off.

• 5020: 100 hours when display backlight is set at dimmed. 5040: 60 hours 

when display backlight is set at dimmed.

For information about how to check battery capacity, refer to