Справочник Пользователя для Planet Technology FGSW-2620PVM

148

 

keywordrunning-config. If you want to save the configuration flash image instead, use the keyword flash. 

<running-config | flash> tftp <ip-addr> <remote-file> 

<ip-addr> specifies the IP address of the TFTP server. 

 

 

MAC limit allows users to set a maximum number of MAC addresses to be stored in the MAC address table. The MAC 

addresses chosen to be stored in MAC address table is the result of first-come-first-save policy. Once a MAC address is 

stored in the MAC address table, it stays in until it is aged out. When an “opening” is available, the switch stored the first 

new MAC address it sees in that opening. All packets from MAC addresses not in the MAC address table should be 

blocked. 

User can configure the MAC limit setting and fill in the new value. 

Enable MAC limit. 

 

Disable MAC limit. 

 

Set port MAC limit value, 0 to turn off MAC limit of port. 

 

Show MAC limit information, including MAC limit enable/disable, per-port MAC limit setting.