Справочник Пользователя для Planet Technology FGSW-2620PVM
User’s Manual of FGSW-2620VM / FGSW-2620PVM
20
■ Reset button
At the left of front panel, the reset button is designed for reboot the Managed Switch without turn off and on the power.
The following is the summary table of Reset button functions
:
Reset Button Pressed and Released
Function
About 1~3 second
Reboot the Managed Switch
Until the PWR LED lit off
Reset the Managed Switch to Factory Default configuration.
The Managed Switch will then reboot and load the default
settings as below:
。
Default Password: admin
。
Default IP address: 192.168.0.100
。
Subnet mask: 255.255.255.0
。
Default Gateway: 192.168.0.254
2.1.2 LED Indications
The front panel LEDs indicates instant status of port links, data activity and system power; helps monitor and troubleshoot
when needed.
FGSW-2620VM LED indication
Figure 2-3:
FGSW-2620VM LED panel
System
LED
Color
Function
PWR
Green
Lights to indicate that the Switch has power.
Per 10/100Base-TX RJ-45 port
LED
Color
Function
LNK/ACT
Green
Lights to indicate the link through that port is successfully established.
Blink to indicate that the Switch is actively sending or receiving data over that port.
Per 10/100/1000Base-T port /SFP interfaces
LED
Color
Function
LNK/ACT 1000
Green
Lit:
indicate that the port is operating at 1000Mbps.
Off
: indicate that the port is operating at 10Mbps or 100Mbps.
Blink
: indicate that the Switch is actively sending or receiving data over that port.