Справочник Пользователя для Planet Technology FGSW-2620PVM

32

 

The Managed Switch supports the following protocols: 

„

 

Virtual terminal protocols, such as Telnet 

„

 

Simple Network Management Protocol (SNMP) 

 

A virtual terminal protocol is a software program, such as Telnet, that allows you to establish a management session from a 

Macintosh, a PC, or a UNIX workstation. Because Telnet runs over TCP/IP, you must have at least one IP address 

configured on the Managed Switch before you can establish access to it with a virtual terminal protocol. 

 

 

Terminal emulation differs from a virtual terminal protocol in that you must connect a terminal directly 

to the console (serial) port.

 

 

To access the Managed Switch through a Telnet session: 

1. 

Be Sure of the Managed Switch is configured with an IP address and the Managed Switch is reachable from a 

PC. 

2. 

Start the Telnet program on a PC and connect to the Managed Switch. 

The management interface is exactly the same with RS-232 console management. 

 

 

Simple Network Management Protocol (SNMP) is the standard management protocol for multi-vendor IP networks. SNMP 

supports transaction-based queries that allow the protocol to format messages and to transmit information between 

reporting devices and data-collection programs. SNMP runs on top of the User Datagram Protocol (UDP), offering a 

connectionless-mode service. 

 

All of the management application modules use the same Messaging Application Programming Interface (MAPI). By 

unifying management methods with a single MAPI, configuration parameters set using one method (console port, for 

example) are immediately displayable by the other management methods (for example, SNMP agent of Web browser). 

The management architecture of the switch adheres to the IEEE open standard. This compliance assures customers that 

the Managed Switch is compatible with, and will interoperate with other solutions that adhere to the same open standard.