Справочник Пользователя для Pertech 5300

11. Click “Finish”.  Windows will issue a warning that the 

driver is not  digitally signed by Microsoft®.  To install the 

driver, click “Continue.”

If using RS-232, it is likely that first time installers will 

need to adjust the RS-232 parameters to match the 

attached printer. After installing the driver, go to “Print-

ers and Faxes” on the “Start” menu and right click on 

the 53xx printer driver.  Select “Properties”.  Select the 

“Ports” tab.  Select “Configure Port”. Verify that the baud 

rate, parity data and stop bits and flow control match. 

VERY IMPORTANT:  Make sure that the Windows COM 

port is set for Flow Control = Hardware (or XON/XOFF if 

the attached printer is configured to for XON/XOFF).  If 

Flow Control is set to “None”, garbage print may eventu-

ally result.  To check the printers configuration settings 

see the next section of this manual “ Configuration & 

Diagnostic Print Tests”.