Справочник Пользователя для Pertech 5300

Failure to load paper correctly may result in a paper jam. To remove paper that has jammed:

 

1.  Open the Front Cover.

 

2.  Pull the paper backwards out of the mechanism. If the paper will not remove pull the paper    

 

 

     forwards out of the mechanism. If needed cycle power to the printer and wait 5 seconds. 

Drop roll into paper bucket so that paper comes off the bottom of the paper roll. Insert the paper end into the paper 

feed actuator assembly. The paper feed actuator will automatically feed the paper through the mechanism . Close 

the paper cover lid,  paper loading is complete.

To load paper the power must be turned ON.  Refer to the pictorial paper loading instructions in the Paper Roll 

Cover. Follow the instructions on this page.

The  5300  printer  includes  the 

following controls : 

•Paper feed button used to       

  advance paper.

•Power switch used to turn the        

 printer on and off.

 Paper and other printer consumables may be purchased from Pertech by calling 1-800-800-6614.

 

Roll paper must be 3.0 inches wide +/- .03 inches (.762mm) with a maximum diameter of 3.5 inches (88.9mm). 

Ink Jet 535X receipt  printers can accommodate 1 paper ply. Impact 537X receipt printers can accommodate 1 or two 

paper plys. The minimum inside core diameter is 5/8 inches (15.875mm). 

Inserted forms allow for one original plus 2 additional copies, this includes the receipt roll paper if used. Minimum 

form size is 5.5 inches by 2.75 inches (139.7 by 69.9mm) with thickness between .0015 to .0047 inches (.0381-

.1194mm) for 2 ply s, .0026-.0047 for 1ply(.066-.1194mm) . Total media thickness allowed is no more than .012 

inches (.305mm) includes the receipt.