Справочник Пользователя для Toshiba Magnia Z300
Installing and Removing Hardware
Before starting operation
49
Before starting operation
WARNING: When installing an optional device, be sure to
use genuine Toshiba parts or those recommended by
Toshiba.
If any other device is used, it may result in a fire hazard.
For more information about optional devices, consult an
authorized MAGNIA service provider.
use genuine Toshiba parts or those recommended by
Toshiba.
If any other device is used, it may result in a fire hazard.
For more information about optional devices, consult an
authorized MAGNIA service provider.
Do not touch any part irrelevant to the installation work.
The server contains many high-tension parts, which if
touched may cause an electric shock.
The server contains many high-tension parts, which if
touched may cause an electric shock.
While carrying out installation work on the peripheral unit,
take extra care not to drop any removed screws in to the
equipment. During installation always follow the instructions.
carefully. Tightly fasten every screw. If a screw drops inside
the equipment, it may result in a fire hazard.
take extra care not to drop any removed screws in to the
equipment. During installation always follow the instructions.
carefully. Tightly fasten every screw. If a screw drops inside
the equipment, it may result in a fire hazard.
CAUTION: When installing/removing optional devices, it is
recommended to wear gloves, due to the sharp-edges
located inside of the server.
recommended to wear gloves, due to the sharp-edges
located inside of the server.
NOTE: When installing an optional device, carefully follow the
instructions according to the optional device.
instructions according to the optional device.
Before installing or removing an optional device, always dis-
connect the power cable from the server.
connect the power cable from the server.
Before installing or removing optional devices carefully read
the instructions that came with the device.
the instructions that came with the device.
When installing/removing components, always work in an
environment which has low humidity, minimal dust, and no
direct sunshine.
environment which has low humidity, minimal dust, and no
direct sunshine.