Справочник Пользователя для Omni Group GREEN SMART 864

© Travis Industries 

4090507 

100-01217_000 

 

Upgrade faces are available for this fireplace and may influence facing installation.  Consult with your 

Travis Dealer if you are using an upgrade face. 

Optional non-combustible facing may be installed on the fireplace.  Use the guidelines below to determine the 
location (also see the following pages for detailed diagrams. 

Tile Line 

Any non-combustible facing under 1" (25mm) thick (see "Thin Facing" on page 32). 

Masonry Line 

Any non-combustible over 1" (25mm) thick (see "Thick Facing" on page 34). 

Hearth Line 

Non-combustible hearth/facing should be installed up to this location (1" (25mm) above the base of the 
fireplace).  The fireplace may be raised to accommodate thicker hearth materials. 

Masonry Line

Hearth Line

Tile Line

Tile Line

Masonry Line

Tile Line

Masonry Line

Tile Line

Masonry Line

Tile Line

Masonry Line

Hearth Line

Masonry Line

Tile Line

NOTE: The hearth or facing can extend no 
greater than 1” (25mm) above the base of the 
fireplace.  The fireplace may be raised to 
accommodate thicker hearth materials.

Remove the center deflector (use needle-
nose pliers if necessary).

These tabs bend down 
to allow for removal.

Re-attach the deflector to the louver.  
Bend the tabs as shown, making sure 
the deflector is secure and flat.

: The deflector must be 

replaced in its original position if a 
different face or grill is used.

Name Height Width Notes 
FPX Artisan, Classic, Fr Ctry 

35-3/4” 
(908mm) 

41” 
(1041mm) 

45-3/4” (1162mm) Radius – May fit over top of tile 
facing 

Winthrop Victorian Lace 

34-1/8” 
(867mm) 

36-7/8” 
(937mm) 

Optional facing will butte to edge of faceplate (tile 
line) 

Wilmington Hearthview 

35-3/4” 
(908mm) 

41” 
(1041mm) 

May fit over top of tile facing 

Winthrop Bungalow 

34” 
(864mm) 

36-7/8” 
(937mm) 

Optional facing will butte to edge of faceplate (tile 
line)