Справочник Пользователя для Novatel GNSS Receiver and Antenna SMART-AG
30
SMART-AG User Manual Rev 2
Chapter 3
Operation
Figure 5: Basic Differential Setup
Reference
Description
1
SMART-AG receiver
2
User-supplied power supply, for example a battery
3
User-supplied device to COM1
4
User-supplied radio device to COM2
5
User-supplied PC/laptop, for setting up and monitoring, to COM1
System biases can introduce errors, as described in the Modes of Operation chapter in the GPS+
Reference Guide. In most cases you need to provide a data link between the base station and rover
station (two NovAtel receivers) in order to receive corrections. SBAS corrections can be
accomplished with one receiver and are exceptions to the base/rover concept. Generally a link capable
of data throughput at a rate of 9600 bits per second, and less than 4.0 s latency, is recommended.
Reference Guide. In most cases you need to provide a data link between the base station and rover
station (two NovAtel receivers) in order to receive corrections. SBAS corrections can be
accomplished with one receiver and are exceptions to the base/rover concept. Generally a link capable
of data throughput at a rate of 9600 bits per second, and less than 4.0 s latency, is recommended.
Once your base and rover are set up, you can configure them as shown in the configuration examples
that follow in Sections 3.3.1 - 3.3.2 starting on Page 32.
that follow in Sections 3.3.1 - 3.3.2 starting on Page 32.
4
Base
Rover
3
+
-
4
+
-
1
2
1
2