Справочник Пользователя для Key Digital ES381

•  Do power off all counters (remove USB lead) before 

connecting and disconnecting counters from the stack 

•  Don’t remove any counters from the stack while the software 

is running 

•  Don’t remove any counters from the stack while any of them 

are powered 

•  Don’t stack several counters and leave one or more counters 

un-stacked…this configuration will ignore the un-stacked 
counters 

•  Don’t short circuit any of the stack connector pins, or bend the 

pins or use excessive force trying to mate the connectors 

•  Don’t probe or drive any of the stack connector signals 
•  Avoid touching the stack connector pins/signals during 

stacking 

•  Do make sure that each stack connector is properly seated in 

place before trying to stack another channel on top 

•  Don’t allow water or dirt etc to enter the counter via the stack 

connector access hole 

•  Do remember that counters in the stack are NOT isolated 

from each other, they are only isolated from the USB ports.  
To re-iterate, stacked counters have their BNC connector 
bodies connected together through the stack connector. 

Elan Digital Systems Ltd.

 13 

 

USBcount50 USER’S GUIDE Iss1