Справочник Пользователя для Key Digital ES381

 

•  Check that the counter hardware installed properly.  Use the 

device manager as shown above and check that there are no 
yellow exclamation marks on any of the USBcount50 devices.  
If there are, try deleting that device, then un-plug and re-plug 
the counter. 

•  Make sure that you do not press cancel or stop during any part 

of the hardware installation.  If you did, use the device 
manager to delete any USBcount50 devices shown, the re-plug 
the device and try again 

•  When you run the software you get a run time error.  This 

could be caused by a much older version of the USBcount50 
software that was installed previously but did not un-install its 
registry hive settings.  To correct this, go to the USBcount50 
install directory and double click the “remove_settings.reg” 
file and click OK when prompted.  This will remove the 
registry hive associated with USBcount50

the software again. 

•  If you are still having problems please use the Windows 

“PrtScr” button to make a screen capture of the application.  
Then paste this into a Word or Paint document and send it to 
tech support. 

 

 
 

 

                                                 

14

 This is where USBcount50 saves the counter settings. 

Elan Digital Systems Ltd.

 26 

 

USBcount50 USER’S GUIDE Iss1