Справочник Пользователя для ITT S-DRIVE IM213

Please review the S-Drive components and insure that you have all the parts and are familiar with their

names. Be sure to inspect all components Goulds Pumps supplies for shipping damage.

S-Drive Variable Speed Controller:
1.  S-Drive Controller
2.  Pressure Transducer with Cable
3.  Conduit Plate Caps

DO NOT power the unit or run the pump until all electrical and plumbing connec-

tions, especially the pressure sensor connection, are completed. The pump should

not be run dry. All electrical work must be performed by a qualified technician. Al-

ways follow the National Electrical Code (NEC), or the Canadian Electrical Code (CEC)

as well as all local, state and provincial codes. Code questions should be directed to

your local electrical inspector or code enforcement agency. Failure to follow electrical

codes and OSHA safety standards may result in personal injury or equipment damage. Failure to

follow manufacturer's installation instructions may result in electrical shock, fire hazard,

personal injury, death, damage to equipment, unsatisfactory performance and may void

manufacturer's warranty.

Hazardous

voltage

Hazardous

Pressure

SPD  Y  XXXX  F

F = WITH OUTPUT FILTER

BLANK = NO OUTPUT FILTER
4 DIGITS FOR HP

5 HP  = 0050

7.5 HP = 0075

10 HP  = 0100

15 HP  = 0150

20 HP  = 0200

25 HP  = 0250

30 HP  = 0300
1 DIGIT FOR INPUT VOLTAGE

230 VOLT = 2

460 VOLT = 4

575 VOLT = 5
SERIES