Справочник Пользователя для iLuv i202

Ear Clip Headset w/ Bluetooth wireless technology                    V10M10_IM_EN_11082006 

www.i-Luv.com 

Before the first use of this headset, it is recommended to fully charge the headset and the 
included audio adapter (dongle). To do so, follow the instructions below: 
                                                                                       
 
1.  Open the mini USB port dust cover (on the 

bottom of the right ear clip, or top right on the 
dongle) before attaching USB cable.  

 
 
2.  Attach other end of cable to supplied USB 

power adapter.  

 
 

 
3.  Plug the supplied USB power adapter to an AC outlet.  
 
4.  Plug the other end to the USB connector on the headset or 

dongle. The red light will be on when connected. When 
the headset/dongle is fully charged, the red light will go off.  

 
5.  Unplug the USB adapter when the headset/dongle is fully charged. 
 
 

If your computer has a USB port, you can also charge the headset or dongle using your 
computers USB port. 
1.  Follow the directions above for connecting the USB cable to the headset or dongle. 
2.  Connect the USB cable into the USB plug on a computer. 
3.  Unplug when fully charged. 
 
 
Notes on Charging 
•  Use only the included power adapter to charge the headset. 
•  The built-in rechargeable battery should be charged at least once every two months.  
•  Headset cannot be used while charging. 
 
Important: If your unit displays red flash and you hear long beep sound while operating, 
this indicates low battery condition, so please charge the unit before operating again.