Справочник Пользователя для iLuv i913

Noise-Canceling Headset w/ Bluetooth wireless technology       V10M10_IM_EN_12072006 

www.i-Luv.com 

Before using this headset, make sure that it is paired with a mobile phone and audio 
devices with Bluetooth wireless technology. To pair with such a device, follow the 
instructions below: 

 

1.  Please make sure the headset is at standby 

mode. If i913 is currently turned on then press 
the Multi-Function button for approximately 
five (5) seconds. There will be a high-pitched 
beep with red light flashes about 4 times and 
headset will go into standby mode. 

 

2.  Press and hold the Multi-function button for 

approximately five (5) seconds until the red 
and blue lights blink alternately around the 
button. The headset is now ready for pairing. 
(Note: Pressing the Multi-function button 
longer than five (5) seconds will turn off the 
headset. If this fails, turn off the headset and  
turn it on again by holding the Multi-Function 
button for five (5) seconds for pairing mode) 

 
3.  Set your mobile phone or audio device to its pairing mode (phones and audio devices 

with Bluetooth wireless technology will have their own pairing instructions. See 
owner’s manual of the phone or device for these instructions).  

 
4.  Place the mobile phone or audio 

device and the i913 close 
together during pairing. The 
mobile phone and most audio 
devices will detect i913 and 
identify it, displaying the model 
number i913. 

 
 
5.  Once the i913 has been identified, confirm as per the 

instructions on the device. You will be required to 
enter a password on the next screen.