Справочник Пользователя для IBM Partner Pavilion Vitrual Switch Extension BMD00082
SmartConnect User’s Guide
150
Chapter 12: Switch Information
BMD00082, February 2009
Port Transceiver Status
The following table describes the Transceiver information fields.
Trunk Groups Information
The following table describes the Trunk Group (Portchannel) information fields.
Table 12-13
Transceiver information
Field
Description
Port
Displays the port number and SFP/XFP number.
Device
Displays the transmission media and device type for the port, as fol-
lows:
lows:
Media:
CU (Copper SFP)
FI (Fiber SFP)
SR (Short Range XFP)
LR (Long Range XFP)
Device: SFP or XFP module
TX-Enable
Displays the transmission status of the module (enabled or disabled).
RX-Signal
Displays the link state of the module port (OK or LOST).
TX-Fault
Displays the fault status of the module (none or FAULT).
Table 12-14
Trunk Group information
Field
Description
Trunk Group
Displays the Trunk number.
Protocol
Displays the protocol used by the trunk (static or LACP)
Virtual Switch Group
Displays the VSG supported by the trunk.
Switch Port
Lists the port members of the trunk.
Note: If a switch is part of a multi-switch stack, the displayed number
indicates the Configured Switch number (csnum) followed by the port
number. See
Note: If a switch is part of a multi-switch stack, the displayed number
indicates the Configured Switch number (csnum) followed by the port
number. See
for more information.
Status
Displays the status of the trunk.