Справочник Пользователя для First Alert P-500
3
Setting Up Your
P-500 Camera
G
ENERAL
P
RECAUTIONS
Use only the power supply provided with the system.
Unplug the power supply when the system is not in use for extended periods.
Do not place any of the equipment near a radiator, vent, or other place where it
might be exposed to heat, moisture, dust, vibrations, or strong magnetic fields.
might be exposed to heat, moisture, dust, vibrations, or strong magnetic fields.
Do not attempt to repair the camera. Contact a qualified technician or the dealer for
service. Any change or modification may damage the equipment and invalidate the
warranty.
service. Any change or modification may damage the equipment and invalidate the
warranty.
When installing the camera, follow manufacturer’s advice when using power tools,
steps, ladders, etc. and wear suitable protective equipment (e.g., safety goggles)
when drilling holes. Before drilling holes through a ceiling, check for hidden
electricity cables and water pipes.
steps, ladders, etc. and wear suitable protective equipment (e.g., safety goggles)
when drilling holes. Before drilling holes through a ceiling, check for hidden
electricity cables and water pipes.
I
NSTALLING THE
C
AMERA
1
Remove cover from camera lens. Select the position for the camera and secure the
camera stand.
camera stand.
Screws and anchors are supplied. Use an appropriate screw type for the mounting surface.
2
Adjust camera to the proper view angle. Make sure the lens is upright relative to your
subject. Tighten the set screws.
subject. Tighten the set screws.
3
Connect the camera to power using the supplied power cable and adapter.
camera stand
camera lens
set screw