Листовка для Aero Mist 60100K
Regulator
(Normal operating pressure 800-1000 PSI.
Pressure not to exceed 1000 PSI)
Liquid-Filled
Pressure Gauge
Outlet
To Misting Feed Line
Automatic
Drain Valve
Oil Filler/Breather Cap
Oil Sight Glass
Oil Drain
On/Off Switch
Power Cord
Water Inlet
Filter Bowl
With Replaceable 5-Micron Filter Element
LIST OF ALL ENCLOSED PARTS
QTY PART NO DESCRIPTION
1 60100K Direct-Drive Pump
1
1
56402 Flexible Nylon Tubing 25' Roll
1
52000 Automatic Drain Valve
57020 MAINTENANCE KIT
QTY PART NO DESCRIPTION
1
57011 Filter Element
1
57025 Pump Oil
• WARNING: Before plugging in the unit for the fi rst time, read the following section carefully. To reduce the risk of
electric shock. Plug in supplied grounded cord into a properly grounded receptacle. When servicing this unit, unplug
power cord before attempting any service or repairs.
• Install pump above grade level on a pre-formed concrete pad, 16"×16" minimum size.
• Plug power cord of unit into a properly grounded receptacle.
• Connect water line to water inlet connector.
• Unit is pre-fi lled with oil and ready to run. Oil should be half full on the sight glass when unit is off. Do not overfi ll.
• On new misting systems, fl ush lines before installing nozzles. The pump will not build pressure until all nozzles are installed.
• Do not exceed 1000 PSI and do not run pump without water.
• Winter shutdown: Unplug pump power cord, shut off water supply, remove fi lter bowl and drain water. Also drain water out of all lines, to
• Plug power cord of unit into a properly grounded receptacle.
• Connect water line to water inlet connector.
• Unit is pre-fi lled with oil and ready to run. Oil should be half full on the sight glass when unit is off. Do not overfi ll.
• On new misting systems, fl ush lines before installing nozzles. The pump will not build pressure until all nozzles are installed.
• Do not exceed 1000 PSI and do not run pump without water.
• Winter shutdown: Unplug pump power cord, shut off water supply, remove fi lter bowl and drain water. Also drain water out of all lines, to
prevent damage to pump or lines.
• 25 feet or more of nylon tubing is recommended in order to reduce vibration noise.
ANNUAL MAINTENANCE INSTRUCTIONS
• Change oil every 500 hours of runtime or once a year. Use approved Pump Oil (52025). Oil should be half full on the sight glass when
• Change oil every 500 hours of runtime or once a year. Use approved Pump Oil (52025). Oil should be half full on the sight glass when
unit is off. Do not overfi ll.
• Change Filter Element Annually
INSTALLATION INSTRUCTIONS
DIRECT DRIVE PUMP SPECIFICATIONS
MODEL FLOW VOLTS MOTOR PUMP LOAD
DIMENSIONS
GPM
60 Hz
HP
RPM
Amps
L x W x H
60100K
1.0
120
0.75
1725
10.4
24x15x13
Maximum pressure is 1000 PSI, normal operating pressure is 800-1000 PSI.
RECOMMENDED MIN-MAX NOZZLE RANGE
NOZZLES
NOZZLES
NOZZLES
Nozzle Size
.014
.012
.008
Nozzle Range
12–25
15–30
22–45
Choose .012/.014 nozzles for dry climates and .008 for more humid climates.