Справочник Пользователя для Advanced Wireless Solutions EMO-500

AW Company 8809 Industrial Drive, Franksville, WI 53126  à web: www.awcompany.com 



 Tel:  262-884-9800  Fax:  262-884-9810 | Email: aw@awcompany.com          

REV. 4                                          10/05                                      EMO-500 Manual.DOC

 

 

19

 
 
   

In order to make the EMO 500 display the correct Totalized Value in Engineering 

Units, again the most important thing to know is the K-factor of the flow meter.  The 
K-factor is the relationship between the amount of the impulses and the engineering units. 
                

 

 
 
     

In order to calculate the KFT for the EMO 500 apply the following formula.

 

 

                                     10000 
                     KFT =                                  

   K-factor

 

 
   

The KFT is the number that should be entered in the Globals Programming section.  The 

K-factor is the number published by the manufacturer as the average K-factor of the flow 
meter.  If this is published in imp/Gal the totalizer can still be set in, say cc's , by 
converting the K-factor to imp/cc.  10000 is a constant

. 

           

           For example: A flow meter has a K-factor of 106666.0 imp/Gal and the display 
should show gallons/minute. 

 

                                  10000 
                     KFT=    

 

 = .9376 Gal 

                                 10666.0                     

 

                       
        

The number 9376 would be entered as the KFT and then the DP (decimal point) key 

would move the DP to 0.937. (See note below). 

 
     

NOTE: We recommend removing the insignificant decimal numbers often produced 

by calculator mathematics. These are mathematically redundant and offer a misleading 
level of precision in the display.  We recommend using a maximum of 4 digits regardless 
of the decimal point.

 

                      

              Example:     

for 60.675,  enter 60.6 

                         

 

for  2.34543 enter  2.345

 

 

NOTE:  
< 

The largest number that can be entered as a KFT is 65000. Refer to KFR note 
above.  

 
3.   KFR for B  The operations are the same as KFR for A.  

 
 

4.   KFT for B  The operations are the same as KFT for A.