Справочник Пользователя для Blaupunkt Car Stereo System TRUE

12

If the USB data carrier is initially selected as 
audio source, the data are read fi rst.

 • If the connected USB data carrier cannot 

be seen, "USB ERROR" is briefl y displayed.

 • The time required for reading in the data 

depends on the design and size of the USB 
data carrier.

 

쏅 Switch off  the car sound system so that the 

data carrier will be correctly unregistered.

 

쏅 Disconnect the USB data carrier.

 

쏅 After you pulled off  the data carrier from the 

USB port at the front of the device, close the 
protective cap of the USB port 

:

.

 

쏅 Detach the control panel.

 

쏅 Insert the memory card with its labelled side 

up and its contacts fi rst into the card slot 

B

 

until it clicks into place.

 

쏅 Attach the control panel.

After switch-on, the device automatically 
selects the inserted memory card as audio 
source. The data of the memory card are be-
ing read. Afterwards, the playback starts in 
MP3 mode.

 • If the inserted memory card cannot be 

played, "SD ERROR" is briefl y displayed.

 • The time required for reading the card 

depends on the design and size of the 
memory card.

 

쏅 Detach the control panel.

 

쏅 Push on the memory card until it disengages. 

 

쏅 Pull the memory card out of the card slot 

B

.

 

쏅 Attach the control panel.

 

쏅 Turn rotary control 

7

 one notch counter-

clockwise or clockwise to change to the pre-
vious/next track.

 • If you turn rotary control 

7

 several 

notches counter-clockwise or clockwise, 
you jump forward or reverse by the corre-
sponding number of tracks.

 • If the current track plays longer than 3 

seconds and you turn rotary control 

7

 by 

one notch counter-clockwise or clockwise, 
the tracks starts playing again.

 

쏅 Press the rotary control 

7

 once.

The display briefl y shows "CUE/REVIEW".

 

쏅 Turn the rotary control 

7

 until the desired 

position has been reached. 

Note:
If you press the rotary control 

7

 twice, the 

display briefl y shows "TRACK SELECT". By 
turning the rotary control 

7

, you select a 

diff erent track. 

 

쏅 Press the 3 button   

>

 to interrupt the 

playback ("PAUSE") or to continue it.

The scan function scans all available tracks.

 

쏅 Press the rotary control 

7

 for approx. 2 sec-

onds to start the scan, or briefl y to continue 
playing the currently scanned track.

During the scan, the display alternately dis-
plays "SCAN" and the current track number 
or fi le name. 

Note:
The scan time can be adjusted (see the chap-
ter "User settings", section "Making settings 
in the "VARIOUS" menu", menu item "SCAN 
TIME").