Справочник Пользователя для Whirlpool W10101296A
2
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Read and follow the instructions provided with any tools listed
here.
Tools Required
Location Requirements
The worksurface can be installed on top of a front-loading washer
and dryer pair situated next to each other. The washer and dryer
must be level side to side and front to back and at the same
height. Proper installation is your responsibility.
and dryer pair situated next to each other. The washer and dryer
must be level side to side and front to back and at the same
height. Proper installation is your responsibility.
Installation Spacing
■
The worksurface will fit on top of a washer and dryer that are
each 27" (68.6 cm) wide and have a spacing of approximately
1" (2.5 cm) between them for the alignment pads.
each 27" (68.6 cm) wide and have a spacing of approximately
1" (2.5 cm) between them for the alignment pads.
Worksurface Dimensions
NOTE: The worksurface will add 3" (7.6 cm) to the overall height
of your washer and dryer.
of your washer and dryer.
■
Measuring tape
■
Level
1"
(2.5 cm)
Top view
Bottom view
A. Alignment pads
B. Side pads
B. Side pads
56
½
"
(143.5 cm)
25"
(63.5 cm)
3"
(7.6 cm)
27
³⁄₈
"
(69.5 cm)
27
³⁄₈
"
(69.5 cm)
1"
(2.5 cm)
1"
(2.5 cm)
B
A
Front edge
Back edge