Справочник Пользователя для Siemens AC75
AC75 AT Command Set
2.2 AT&V
s
AC75_ATC_V01.002
Page 33 of 569
10/30/06
Confidential / Released
2.2
AT&V Display current configuration
returns the current parameter setting. The configuration varies depending on whether or not PIN authen-
tication has been done and whether or not Multiplex mode is enabled (see
Syntax
Parameter Description
[0]
Profile number
Notes
cannot be represented by a \Q equivalent, \Q255 will be displayed.
• The parameters of
can only be displayed after the SMS data from the SIM have been read success-
fully for the first time. Reading starts after successful SIM authentication has been performed, and may take
up to 30 seconds depending on the SIM used. While the read process is in progress, an attempt to read the
parameter will result in empty values.
• The parameter of
will only be displayed in SMS PDU mode, see
.
Exec Command
AT&V
Response(s)
ACTIVEPROFILE:
... (see Section
... (see Section
)
OK
Reference(s)
PIN
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
V.250
-
+
±
+
+
±
±
-
+
-
<value>
(num)