Справочник Пользователя для Encore electronic 802.11G/B

Ad-Hoc mode (Peer to Peer):

Printer

Print Server

Laptop

Hardware Installation:

1. Turn off the printer’s power.

2. Connect the print server to your printer with the supplied printer cable.

3. Turn the printer’s power on.

4. Plug the AC power adapter into the power connector on the print server.

5. Wait 10 seconds as part of the print server’s Power On Self Test (POST).

Software Installation:

1. To enable network communication with print server, your computer must have a proper

IP address, e.g. 192.168.0.100 (the print server’s default IP is 192.168.0.10)

2. Insert the setup CD into your CD-drive. The autorun program will be started.

3. Choose

Wizard to install the print server and configure the connected printer.