Справочник Пользователя для Axis Communications Video Encoder Blade AXIS Q7406

This will reset all the parameters in all 6 units (including all six IP 
addresses) to the factory default settings.

1. Press both the Reset button and Control button.
2. Release the Reset button and hold the Control button.
3. Keep the Control button pressed until the Power indicator 

turns green and the six Status indicators turn amber (this 
may take up to 15 seconds).

4. Release the Control button. When the Status indicators 

display green (which can take up to 1 minute) the process is 
complete and the video encoder has been reset.

5. Re-assign the IP addresses, using one of the methods 

described in this document.

To reset an individual unit to the original factory default settings, 
use the button provided in that unit’s web interface. For more 
information, please see the online help.

Once installed, your AXIS Q7406 is accessible on your local network (LAN). To access the video 
encoder from the Internet, network routers must be configured to allow incoming traffic, which is 
usually done on a specific port. 

• HTTP port (default port 80) for viewing and configuration
• RTSP port (default port 554) for viewing H.264 video streams

Please refer to the documentation for your router for further instructions. For more information on 
this and other topics, visit the Axis Support Web at www.axis.com/techsup

The user’s manual is available from the Axis Web site at www.axis.com or from the Axis Network 
Video Product CD supplied with this product.

Control button

Power Indicator

Reset button

Status Indicator

Tip! 
Visit www.axis.com/techsup to check if there is updated firmware available for your AXIS 
Q7406. To see the currently installed firmware version, see the Basic Configuration web 
page in the product’s Setup tools.