Справочник Пользователя для Autostart CT-5060

 

CT-5060 User Guide 

P. 8 

Ignition Re-Lock 

When the Ignition-Controlled Door Locks option is enabled and the ignition is 

, should 

any door be unlocked and opened, all the doors will be re-locked next time the brake 

pedal is pressed. 

Secure Lock 

This is an added security feature. If your system was installed with the Secure Lock 
option, it will automatically lock your doors and arm the system 4 seconds after your start 

your car by remote. The system will automatically lock the doors again after shut-down. 

Remote Trunk Release 

If your system was installed with the Remote Trunk Release, you can open your trunk by 

pressing the 

 button for 3 sec. on the transmitter, or by pressing the 

 button 

twice within 3 sec. 

Starter Kill 

This added security feature will immobilize your vehicle when the system is armed. If 
your system was installed with the Starter Kill option, you will not be able to start your 

vehicle with the key unless the system has been disarmed first.  

The Starter Kill option follows the Alarm arming function, and can therefore be 

programmed to be active (will not arm automatically) or passive (will arm automatically). 
In passive Mode, the Starter Kill can be set to arm automatically in 30 seconds either 

with or without Siren chirps. 

To  disarm  the Starter Kill, press and hold the 

 button on the transmitter. The 

parking lights will flash twice. (If door locks were installed, this will also unlock the doors.) 
In passive Mode, the system will automatically re-arm itself 30 seconds after unlocking 

the doors if the key has not been inserted in the ignition by then. 

To arm the Starter Kill, press and hold the 

 button on the transmitter. The parking 

lights will flash once. (If the door locks were installed, this will also lock the doors.) 

Engine Run Time 

If you have a gas engine, your system can be programmed to run the engine for 4, 15, or 
25 minutes (15 min default). If you have a diesel engine, it can be programmed to run the 

engine for 9, 20, or 30 minutes (20 min default).   

Multi-Car Operation 

This option allows the owner of two vehicles, both equipped with identical systems, to 

control both systems with only one remote transmitter. To control the second vehicle, 

simultaneously press the 

 button and the button of the function you wish to use: 

 

•  Press 

 + 

 button simultaneously: ..................

 

•  Press 

 + 

:...................................................

 

•  Press 

 + 

: .............................................

 

•  Press 

 + 

:..............................................

 

•  Press 

 + 

 + 

:........................................

 

•  Press 

 + 

 for 3 sec:...............................