Справочник Пользователя для Analog Devices OFD803
Chapter 2 : STARTING (continued)
OCTO
²
/ QFX402
PAGE 16
2-4. INPUTS #2 to 8 DESCRIPTION
c CONNECTION:
You can connect to these inputs one of the following source:
• A composite video source.
NOTE: The input #7 can accept a composite video source on its BNC connector. The input #8 can accept a
• A composite video source.
NOTE: The input #7 can accept a composite video source on its BNC connector. The input #8 can accept a
composite video source on its RCA connector.
• A S.VIDEO source.
NOTE: The input #7 can accept a S.VIDEO source on its BNC connectors. The input #8 can accept a S.VIDEO
NOTE: The input #7 can accept a S.VIDEO source on its BNC connectors. The input #8 can accept a S.VIDEO
source on its 4-pin mini DIN connector.
• A Component video source.
• A HD-YUV source.
• A RGBS video source.
• An analog computer source (RGBHV, RGsB, RGBS).
d HD15 PIN ASSIGNMENT:
SIGNAL COMPUTER (analog)
VIDEO RGB/S
YUV & HD-YUV
S.VIDEO (Y/C)
COMPOSITE VIDEO
PIN 1
RED.
RED.
Cr / Pr.
C (chrominance).
PIN 2
GREEN.
GREEN.
Y.
Y (luminance).
VIDEO (NTSC, PAL...)
PIN 3
BLUE.
BLUE.
Cb / Pb.
PIN 6
RED return.
RED return.
Cr / Pr return.
C return.
PIN 7
GREEN return.
GREEN return.
Y return.
Y return.
return.
PIN 8
BLUE return.
BLUE return.
Cb / Pb return.
PIN 10
GND.
GND.
PIN 13
H sync or C sync (S).
C sync (S).
PIN 14
V sync.
HD15 female connector of the device.
e AUDIO SOURCE:
-You can connect an unbalanced stereo audio source on a jack 3.5 connector (input #2 & 8).
-You can connect an unbalanced stereo audio source on a MCO connector (input #3 to 6).
-You can connect an unbalanced or balanced stereo audio source on a MCO connector (input #7).
-You can connect an unbalanced stereo audio source on a MCO connector (input #3 to 6).
-You can connect an unbalanced or balanced stereo audio source on a MCO connector (input #7).
2-5. OUTPUTS DESCRIPTION
c ANALOG OUTPUT:
You can connect to this output an analog display device.
d DVI OUTPUT:
You can connect to this output an analog* or digital display device.
* OFX803, OFD803 & OCP803.
* OFX803, OFD803 & OCP803.
e DVI-I PIN ASSIGNMENT (OFX803, OFD803, OCP803):
Pin Function
Pin Function
Pin
Function
1
TMDS Data 2-
9
TMDS Data 1-
17
TMDS Data 0-
2
TMDS Data 2+
10
TMDS Data 1+
18
TMDS Data 0+
3
TMDS Data 2 Shield
11
TMDS Data 1 Shield
19
TMDS Data 0 Shield
4
Not used.
12
Not used.
20
Not used.
5
Not used.
13
Not used.
21
Not used.
6
DDC Clock
14
+ 5V (Power)
22
TMDS Clock Shield
7
DDC Data
15
Ground for (+5V)
23
TMDS Clock+
8
Analog Vertical Sync.
16
Hot plug detect.
24
TMDS Clock-
C1
Analog Red video (or Cr / Pr or C)
C2
Analog Green Video (or Y or composite video)
C3
Analog Bleu Video (or Cb / Pb)
C4
Analog Horizontal Sync (or composite sync)
C5
Analog Common Ground Return
DDC = Display Data Channel.
TMDS = Transition Minimized Differential Signal.
5
6
1
15
10
11
8
1
9
16
24
17
C1 C2
C3 C4
C5