Справочник Пользователя для Maxon Telecom Modem MM-6280IND

 

 

HSDPA Standard At Commands        Page 38 of 60                             Version 1.2 

 

 

+CGANS Opt. 

Manual response to a network request for PDP context 
activation 

Not supported 

+CGCLASS 

Opt. 

GPRS mobile station class 

Supported 

+CGCLPAD 
(GPRS only) 

Opt. 

Configure local triple-X PAD parameters 

Not supported 

+CGEREP 

Opt. 

Packet Domain event reporting 

Supported 

+CGREG 

Opt. 

GPRS network registration status 

Supported 

+CGSMS 

Opt. 

Select service for MO SMS messages  

Supported 

The set command specifies PDP context parameter values for a PDP context identified by the 
(local) context identification parameter, <cid>. The number of PDP contexts that may be in a 
defined state at the same time is given by the range returned by the test command. 
A special form of the set command, +CGDCONT= <cid> causes the values for context number 

<cid>

 to become undefined. 

The read command returns the current settings for each defined context. 

The test command returns values supported as a compound value. If the MT supports several 
PDP types, <PDP_type>, the parameter value ranges for each <PDP_type> are returned on a 
separate line.  

+CGDCONT=[<cid> 

[,<PDP_type> [,<APN> 

[,<PDP_addr> 

,<d_comp>[,<h_comp> 

[,<pd1> 

[,…[,pdN]]]]]]]]] 

OK 

ERROR 

+CGDCONT? 

+CGDCONT: <cid>, <PDP_type>, 

<APN>,<PDP_addr>,<d_comp>, <h_comp>[,<pd1>[,…[,pdN]]] 

[<CR><LF>+CGDCONT:<cid>,<PDP_type>, <APN>,<PDP_addr>,<d_comp>, 

<h_comp>[,<pd1>[,…[,pdN]]] 

[...]] 

+CGDCONT=? +CGDCONT: 

(range of supported <cid>s), <PDP_type>,,,(list of supported 

<d_comp>

s), 

(list of supported <h_comp>s)[,(list of supported <pd1>s)[,…[,(list of 
supported <pdN>s)]]] 

[<CR><LF>+CGDCONT: 

(range of supported <cid>s), <PDP_type>,,,(list of 

supported <d_comp>s), 

(list of supported <h_comp>s)[,(list of supported <pd1>s)[,…[,(list of 
supported <pdN>s)]]] 

[...]] 

Value 

<cid>

: (PDP Context Identifier) a numeric parameter which specifies a particular PDP 

context definition. The parameter is local to the TE-MT interface and is used in other 
PDP context-related commands. The range of permitted values (minimum value = 1) is