Справочник Пользователя для Mark Levinson DUAL MONAURAL PREAMPLIFIER N26

TAPE 1 OUT, TAPE 2 OUT
Connect these outputs to the right-channel and left-channel tape
inputs of your tape machine.

TAPE 1 IN, TAPE 2 IN
Accept right-channel and left-channel signal leads from the tape-
output connectors of a tape machine. These inputs can also be
used with other line-level source equipment.

These outputs are unaffected by the OUTPUT LEVEL control on the
front panel of the Nº26.

POWER SUPPLY INPUT
Accepts one end of the DC cable that connects the Nº26 to the
PLS-226.

CD
Accepts right-channel and left-channel balanced signal leads
from a CD player or other line-level source equipment.

AUX 1
Accepts right-channel and left-channel signal leads from line-level
source equipment.

PHONO/AUX 2
If your Nº26 is equipped with the phono option, connect your
turntable's right-channel and left-channel signal leads to these
inputs.

If your Nº26 isn't equipped with a phono option, these inputs will
accept signal leads from any line-level source equipment.

Connect your tonearm's ground lead to this binding post.

If your Nº26 is equipped with the balanced input option, connect
the right-channel and left-channel balanced line-level signal leads
from source equipment with balanced output.

The pin assignments of these XLR-type female input connectors
are:

Pin 1: Signal ground
Pin 2: Signal + (non-inverting)
Pin 3: Signal – (inverting)
Connector ground lug: chassis ground

Refer to the operating manual of your balanced-output line-level
source to verify that the pin assignments of its output connector
correspond to the Nº26. If not, wire the cable so that the
appropriate output pin connects to the equivalent input pin.

1 2

3