Инструкции Пользователя для Marvel ML24BN

15

Magnetic Gasket 

remove starting at a 

corner, grasp and pull 

away from the door.

Depending on your model cut the overlay door panel to the 

dimensions shown in Figures 16 and 17 for a left hand door 

model or Figures 18 and 19 for a right hand door model.

Overlay panel 

flush with top 

of door.

Holes in 

gasket 

retainer.

Overlay panel to 

be centered on 

width of door.

Figure 15

Figure 15a

With the door laying on a flat surface and starting at a 

corner of the door remove the magnetic door gasket from 

the interior side of the door, see Figure 15. Set the gasket 

aside on a flat surface.

There are 10 holes in the gasket retainer extrusions, (3 on 

each side and 2 at the top and bottom which are used to 

fasten the panel to the front of the door. The screws are 

provided in the literature pack.

Press and hold down this 

tab on the wire connector 

and pull the connector apart.

Figure 14