Использование И Уход для Dacor DYRTP486SNGH

10

Cleaning the Rangetop (cont.)

Burner Components and Igniters

•  Use care while cleaning the igniters. The porcelain is 

fragile and can crack or break.

•  Do not clean the burner parts in a dishwasher. They 

will be damaged.

IMPORTANT: The igniters may not spark or work 

properly if the burner parts or the igniters them-

selves are not clean and dry.
After disassembling the burners, check for any dirt 

or grime deposited on the individual parts, including 

the igniters.
1.  Use a firm toothbrush to clean completely 

around the igniter, including all of the metal top 

and porcelain base. Do not use water to clean 

the igniters. If necessary, use a small amount of 

rubbing alcohol to help dissolve grime.

2.  Examine the burner rings. Remove anything 

stuck in the holes with a straightened paper 

clip, wire or needle. Be careful not to scratch or 

damage the ring and head. Do not distort the 

shape of the burner ring holes.

Care and Cleaning

3.  Clean all of the burner parts, including the 

burner bases, with window cleaner or rubbing 

alcohol. Use a cleaning brush with plastic bristles 

or a firm toothbrush. Then, rinse the parts well 

with clean water. Dry all the parts thoroughly 

before reassembling them.

4.  Reassemble according to the burner and grate 

assembly instructions on page 5. Test the burn-

ers after reassembling them. When the burners 

are installed properly, 

the flame will be steady. 

It will also have a sharp, 

blue inner cone that will 

vary in length propor-

tional to the burner size. 

To increase grate life 

the Smart Flame feature 

reduces the flame height 

under the grate fingers. 

If the flame is uneven, 

be sure that all the 

burner parts are properly 

positioned, then check for any remaining dirt or 

grime on the burner parts or igniter. 
If erratic sparking (clicking) is still present, make 

sure the igniter is completely dry. If the unit still 

exhibits problems after drying, call your local 

Dacor Authorized Service Agent.

Grates, Spill Tray and WOK Ring

Do not clean the rangetop grates or WOK ring in a 

dishwasher. They will be damaged.

IMPORTANT: DO NOT use any of the cleaners 

listed below to clean the burners and igniters.
The grates, the spill tray and optional WOK ring are 

coated with a porcelain finish. 
•  For everyday cleaning, use a soft cloth or non-

abrasive pad with warm soapy water to clean all 

of the porcelain parts.

•  If necessary, tough stains may be removed by 

applying full-strength sprays such as Simple 

Green™, Ajax™ All-Purpose Cleaner or Formula 

409™. To minimize wear, use the mildest cleaner 

needed to get the surface clean.

•  For extremely stubborn stains, you may use a 

mildly abrasive cleaner or applicator, such as 

Soft Scrub™, Bon Ami™, S.O.S.

®

 pads or other 

soap-filled steel wool pads. Use these clean-

sion. Aggressive or extensive use of these 

types of abrasives will damage the finish. Finish 

Burner ring

Burner base

Burner ring

Burner cap

Burner cap

Burner head

Burner base