Инструкция для Zephyr CCAE36ASX

7. Place blower over round to rectangular adapter 

as shown above.

8. Install blower with round to rectangular adapter 

into hood.

9. Mount blower brackets to hood using  two 

´ ´VFUHZVIRUHDFKEUDFNHW6FUHZV
are included with internal blower.

10. Install rectangular starting collar to back of hood 

using six M4*8 screws recently removed from 
rectangular cap (three screws on each side).

Install four additional M4*8 screws in the top 
and bottom middle of rectangular starting 
FROODU&KHFNDQGYHULI\LQQHUDGDSWHULV¿UPO\
secured.

11. Connect 9 pin male connector from blower to 9 

pin female connector on control board box.