Брошюра для Gaggenau AL400721
162
Cooktops
C X 480 100
Frameless
Width 80 cm
Width 80 cm
Special accessories
G N 232 110
G N 232 110
Teppan Yaki made of multi ply material,
GN 1/1
For full surface induction hob CX 480.
GN 1/1
For full surface induction hob CX 480.
G N 232 230
Teppan Yaki made of multi ply material,
GN 2/3
For full surface induction hob CX 480.
GN 2/3
For full surface induction hob CX 480.
Full surface induction cooktop
C X 480
– One single big cooking surface
– Free positioning of cookware
– All sizes and formats of cookware
can be used
– TFT touch display for an intuitive
control of all functions
– Max. power output for big cookware
of up to 4.4 kW
– Frameless for flush installation
Cooking zones
One unique cooking surface of
2,800 cm².
Up to 4 items of cookware can be
placed simultaneously on the cooktop.
2,800 cm².
Up to 4 items of cookware can be
placed simultaneously on the cooktop.
Handling
Easy to use colour graphic TFT touch
display with use indications.
Electronic power control in 17 output
levels.
display with use indications.
Electronic power control in 17 output
levels.
Features
Booster function.
Individual pot detection.
Cooking timer for each cooking
position.
Timer.
Information key with use indications.
Power management.
Individual pot detection.
Cooking timer for each cooking
position.
Timer.
Information key with use indications.
Power management.
Safety
Main switch.
Residual heat indicator.
Child lock.
Display cleaning protection.
Residual heat indicator.
Child lock.
Display cleaning protection.
Planning notes
Operates with magnetic (induction)
iron pots and pans only. For an optimal
heat distribution, the use of sandwich
bottom cookware is recommended.
The wok pan WP 400 001 cannot be
used with this appliance.
Installation is possible in worktops
made of stone, synthetics or solid
wood. Heat resistance and watertight
sealing of the cut edges must be
observed. Concerning other materials
please consult the worktop manufac-
turer.
The bearing capacity and stability, in
the case of thin worktops in particular,
must be supported using suitable
substructures. Take into account the
appliance weight and additional loads.
The groove must be continuous and
even, so that uniform placing of the
appliance on the gasket is ensured. Do
not use discontinuous lining.
Immersion depth 64.6 mm.
Intermediate shelf is required.
Appliance must be fixed from
underneath.
Cooktop clamping range: 30 – 50 mm.
Joint width may vary due to dimen-
sional tolerances of the glass ceramic
cooktop and the worktop cut-out.
Appliance weight: approx. 26 kg.
iron pots and pans only. For an optimal
heat distribution, the use of sandwich
bottom cookware is recommended.
The wok pan WP 400 001 cannot be
used with this appliance.
Installation is possible in worktops
made of stone, synthetics or solid
wood. Heat resistance and watertight
sealing of the cut edges must be
observed. Concerning other materials
please consult the worktop manufac-
turer.
The bearing capacity and stability, in
the case of thin worktops in particular,
must be supported using suitable
substructures. Take into account the
appliance weight and additional loads.
The groove must be continuous and
even, so that uniform placing of the
appliance on the gasket is ensured. Do
not use discontinuous lining.
Immersion depth 64.6 mm.
Intermediate shelf is required.
Appliance must be fixed from
underneath.
Cooktop clamping range: 30 – 50 mm.
Joint width may vary due to dimen-
sional tolerances of the glass ceramic
cooktop and the worktop cut-out.
Appliance weight: approx. 26 kg.
Please read additional planning notes
on page 178.
on page 178.
Connection
Total connected load 7.2 kW.
Connecting cable 1.5 m without plug.
Connecting cable 1.5 m without plug.
Worktop strength
Solid worktop
30 - 50
Thin worktop
with reinforced substructure
with reinforced substructure
< 30
30 - 50
min. 70
min. 600
min. 50
min. 35
64.55
90°
R 8
+2
R 5
6.5
+0.5
518
±1
513
793
798
±1
780
+2
490
+2
85
36
145
1250
330