Справочник Пользователя для Panasonic PT-RZ370U

ENGLISH - 29

 

f

When connecting the projector to a computer or an external device, use the power cord supplied with each device and commercially 

available shielded cables.

 

f

Use a commercial DVI-D cable with a ferrite core.

 

f

For an HDMI cable, use an HDMI High Speed cable that conforms to HDMI standards. If a cable that does not conform to HDMI standards 

is used, images may be interrupted or not displayed, or the projector may not function properly.

 

f

The <HDMI IN> terminal of the projector can be connected to an external device with an DVI terminal by using an HDMI/DVI conversion 

cable, but some devices may not project the image properly or otherwise function properly. (x page 63)

 

f

The <DVI-I IN> terminal (for digital input) supports single link only.

 

f

For signals that the projector can project, refer to “List of compatible signals” (x page 121).

 

f

If you operate the projector using the computer with the resume feature (last memory), you may have to reset the resume feature to operate 

the projector.

 

f

During DVI digital signal input, EDID settings may be necessary depending on the external devices to be connected. (x page 62)

 

f

If the [AUDIO IN SELECT] settings are incorrect, the projector may not output audio or otherwise function properly. (x page 78)

Twisted-pair-cable transmitters such as the optional digital interface box (Model No.: ET-YFB100G) use twisted-pair-cables to transmit input 

audio and video signals, and the projector can input those digital signals to the <DIGITAL LINK/LAN> terminal.

%OXUD\GLVFSOD\HU

+'0,FDEOH
FRPPHUFLDOO\DYDLODEOH

&RQWUROFRPSXWHU

3URMHFWRUFRQQHFWLQJWHUPLQDOV

([DPSOHRIWZLVWHGSDLUFDEOHWUDQVPLWWHU

&RPSXWHU

&RPSXWHUFDEOH
FRPPHUFLDOO\DYDLODEOH

9&5

+XE