Справочник Пользователя для Panasonic PT-RZ370U
Chapter 4 Settings — [NETWORK] menu
88 - ENGLISH
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select the item from the
sub-menu.
Refer to “Navigating through the menu” (x page 41) for the operation of the menu screen.
Refer to “Navigating through the menu” (x page 41) for the operation of the menu screen.
f
After selecting the item, press asqw to set.
[DIGITAL LINK MODE]
Switch the communication method of the <DIGITAL LINK/LAN> terminal of the projector.
1)
Press as to select [DIGITAL LINK MODE].
2)
Press qw to switch [DIGITAL LINK MODE].
f
The items will switch each time you press the button.
[AUTO]
Switches the communication method automatically between either the DIGITAL LINK or Ethernet.
[DIGITAL LINK]
Fixes the communication method to DIGITAL LINK.
[ETHERNET]
Fixes the communication method to Ethernet.
Possible communication modes
Setting
Communication possible
HDMI
Ethernet
RS-232C
[AUTO]
For DIGITAL LINK
l
l
l
With Ethernet
―
l
―
[DIGITAL LINK]
l
l
l
[ETHERNET]
―
l
―
l
: Communication possible
―: Communication not possible
[DIGITAL LINK SETUP]
Set the communication method to DIGITAL LINK.
When the projector is connected directly via Ethernet
1)
Press as to select [DIGITAL LINK SETUP].
2)
Press the <ENTER> button.
f
The
[DIGITAL LINK SETUP] screen is displayed.
3)
Press as to select [DUPLEX(ETHERNET)].
4)
Press qw to switch the communication method.
f
The items will switch each time you press the button.
[AUTONEGOTIATION]
The communication method is set automatically.
[100BaseTX-Full]
Full duplex communication method is set.
[100BaseTX-Half]
Half-duplex communication method is set.
5)
Press as to select [STORE].
6)
Press the <ENTER> button.