Инструкция для Sony PCNA-MR10

❑

The network may not have enough bandwidth. 
Check the following, if applicable to your network environment:

❑

The network cables supports 100 BASE-TX.

❑

The network switch or the router device supports 100 BASE-TX.

❑

The connected server or the network may be experiencing overload. 
Using the High Quality setting in the Live Mode of the TV Settings screen 
may cause your network or system to overload. Try changing the Live Mode 
setting to Standard or Low Bandwidth.

❑

Verify that the VAIO® computer(s) is turned on. 

❑

Verify that the network settings are configured correctly. 

❑

Check the following, if applicable to your network environment:

❑

A crossover cable is used for a direct connection between RoomLink™ 
and a single VAIO computer.

❑

The network switch or the router device is turned on. (See the 
information supplied with your network switch or router device, for 
details.)

❑

The router device is turned on before turning on the network media 
receiver.

❑

The network media receiver, network switch, or router device are 
properly connected using the appropriate network cables

†

.

❑

If using a router device, RoomLink™ and the VAIO computer have 
been configured to obtain the IP address automatically.

❑

Verify that the correct server name appears in the Select a server 
screen. (The Select a server screen lists all current and previous servers 
connected to RoomLink). 

* You may see an error message, “Cannot connect to the server.”
† Use network cables that support 100BASE-TX.