Справочник Пользователя для Standard Horizon CPV350
Page 116
CPV350
[CALL/SET] Key
The [CALL/SET] key functions as the enter key.
Secondary use
Press the [CALL/SET] key to access the DSC OPERATION
menu.
Press and hold the [CALL/SET] key to access the SETUP
menu.
The [CALL/SET] key functions as the enter key.
Secondary use
Press the [CALL/SET] key to access the DSC OPERATION
menu.
Press and hold the [CALL/SET] key to access the SETUP
menu.
[DW] Key
Watches for a transmission on CH16 and another selected
channel until either signal is received. (Dual watch)
Secondary use
Press and hold [DW] key, intercom operation will operate
between radio and RAM+ Mic.
Watches for a transmission on CH16 and another selected
channel until either signal is received. (Dual watch)
Secondary use
Press and hold [DW] key, intercom operation will operate
between radio and RAM+ Mic.
[NAV] Key
Press this key, when connected to the GPS receiver, the
LCD displays Position Data and Time from the GPS.
Press this key, when connected to the GPS receiver, the
LCD displays Position Data and Time from the GPS.
[WX] Key
Immediately recalls the previously selected US NOAA
weather channel from any channel location.
Secondary use
Holding down the [16/9] key while pressing the [WX] key
switch the Channel Group.
Immediately recalls the previously selected US NOAA
weather channel from any channel location.
Secondary use
Holding down the [16/9] key while pressing the [WX] key
switch the Channel Group.
NOTE
If position is displayed, this icon will be hidden.
[DISTRESS] KEY
Used to send a DSC Distress Call. To send the distress call refer to section “19.2.0
Transmitting a DSC Distress Call.”
Used to send a DSC Distress Call. To send the distress call refer to section “19.2.0
Transmitting a DSC Distress Call.”
21.1
PA/FOG OPERATION
The RAM+ is capable of controlling the 30W Public address, 4 fog horns, bells and whistles.
21.1.0 Operating the PA / Hailer
1. Press and hold the [NAV] key then select “PUBLIC ADRESS” with the
[UP(
)] or [DOWN()] key.
2. Press the [CALL/SET] key.
3. Press the PTT switch and speak into the microphone.
4. To turn up the PA Volume, press the PTT switch and press the [UP(
3. Press the PTT switch and speak into the microphone.
4. To turn up the PA Volume, press the PTT switch and press the [UP(
)]
or [DOWN(
)] keys to adjust the Audio output level. The level can be set
from 0 to 30W.
5. To adjust the listen back volume, (while in listenback mode) press the
[VOL] key, then press the [UP(
)] or [DOWN()] key to the desired
listen back volume.
To exit from the PA / Hailer mode, press and hold down the [NAV] key again.
SCAN
DW
NAV
WX
CALL
SET
MEM
IC
U
.I.C
MENU
16
9