Справочник Пользователя для Smeg OF601XA

Скачать
Страница из 28
 
 
Instructions for the installer
 
 
10
 
3.  ADAPTATION TO DIFFERENT TYPES OF GAS 
 
 
 
 
 
Before performing any cleaning or maintenance work, disconnect the 
appliance from the mains.
 
 
The hob of the cooker is adjusted for use with  either natural gas at a 
pressure of 1.0kPa. If used with other types of gas, you have to replace 
the nozzles, then adjust the minimum flame on the gas taps. For nozzle 
replacement and burner adjustment operate as described in the following 
paragraph. 
 
3.1  Replacement of nozzles on the hob 
 
This operation requires no primary air regulation. 
1.
 
Extract the grids and remove all the caps and flame-spreader 
crowns; 
2.
 
unscrew the burner nozzles with a 7 mm socket wrench; 
3.
 
replace the nozzles according to the type of gas to be used and the 
description in paragraph "3.2  Burner and nozzle characteristics 
table". 
4.
 
Replace the burners in the correct position.