Справочник Пользователя для Samsung RS2533SW

26

Connecting to water supply line:

1) In order to operate the ice maker properly, water pressure of 20 ~125 psi  is required. 

In this range a 170 cc paper cup can be filled in 10 secs.

2) The water filter removes particles. It does not sterilize or destroy any micro-organisms.

3) If the refrigerator is installed in area with low water pressure (below  20psi), you should install a boost-

er pump to compensate for the low pressure.

4) Ensure the water storage tank inside the refrigerator is properly filled inifially. push the water dis

penser lever until the water runs from the outlet.

1) Shut off the main water supply and turn the Ice maker to 

the off position.

2) Locate the nearest cold drinking water line.

3) Follow the instructions in the ice maker installation kit.

1. Cold Water pipe

2. Pipe Clamp.

3.Copper Tubing

4.Compression Nut

5.Compression Sleeve

6.Shut Off Valve

7.Packing Nut.

A universal water supply kit is available at extra cost from your dealer. The refrigerator manufac-

turer recommends using a water supply kit containing copper tubing.