Справочник Пользователя для Liebherr EWTN

WFI1051 / EWTN 2956

18

I

NSTALLATION

LBR034

Only install the winecooler/freezer in a stable kitch-
en cabinet that has been properly aligned.

-   Mount and fix the handles, depending on your 

model and choice.

Unpack the installation kit and check with the pro-
vided parts list if all parts are included.
The part numbers given in the parts list are identical 
to the numbers in the respective fi gures.

For installation you will need the following tools:

Included:
-  Star Key Torx® 15
-  Star Key Torx® 20
-  Star Key Torx® 25
-  Socket Wrench 8 mm
-  Open-end Wrench 10 mm

Not in package:
- Phillips (star) screwdriver
- Level
- Ruler

1.   Screw the installation frame at the top (1) onto 

the appliance with screws (2).

2.   Place the ventilation grille (3) on this, align it in 

the center and secure at the front from under-
neath.

3.   Slide brackets (4) onto the side installation 

frames (5) from above and below.

4.   Using the frame (5), screw the brackets onto 

the side wall*.

5.   Slide the side installation frames (5) upwards 

until they are in contact with the underside of 
the ventilation grille.

6.   Secure the side frames with the adhesive sec-

tion (7) to prevent them from sliding down. 
Remove the protective film and affix the adhe-
sive sections over the upper brackets on the 
handle and hinge sides.

* Depending on model and options