Справочник Пользователя для Quantum 2.4.1

Mount the backup media. 

 a. From the StorNext Storage Manager (SNSM) Home Page, click Media > Library > Mount.

This action enables media to mount without requiring an operator to manually open the library 
and place backup media in the drive.

 b. Record the drive alias where the media is mounted.

Record the serial number of the drive where the backup media is mounted. This information is used 
during the restore process (after RHEL is installed). Type:

/usr/adic/TSM/exec/fsconfig -i <drive_alias>

Stop the remaining software components. Type:

/usr/adic/bin/adic_control stop

Capture and print the following command output so it is accessible after RHEL is installed. Type:

df

grep Node /usr/adic/DSM/config/*.cfg

/usr/cvfs/bin/cvlabel -l

grep cvfs /etc/fstab

/usr/adic/TSM/util/fs_scsi -p

cat /etc/sysconfig/rawdevices

Remove the SNMS software. Insert the SNMS installation CD (the previous version that is being 
removed) and type:

inst.StorNext -remove

Insert the RHEL installation CD in the CD drive.

10 Power off the machine.

11 Disconnect the RAID used for the StorNext FS file systems from the machine.

12 If an internal disk is used for the StorNext FS file system, ADIC recommends that you disconnect it 

before installing RHEL so it is not reformatted during the installation process.

Use this procedure to upgrade to RHEL.

Power on the machine and install RHEL.

During the installation, you are directed through a series of screens and CD changes.

Before clicking Finish on the last installation screen, reconnect the RAID.

Perform all post-upgrade configuration tasks necessary to complete the RHEL setup. 

Post-upgrade tasks can include, but are not limited to, setting up the yellow pages, auto mounts, raw 
devices, etc.