Справочник Пользователя для Cabletron Systems 8H02-16

Appendix C: Optional Installations and Mode Switch Bank Settings

Figure C-3 shows the location of the Fast Ethernet Interface Module 
connectors on the 8H02-16 board for port slots 15 and 16. 

To install a Fast Ethernet Interface Module in port slot 15 or 16, proceed 
as follows:

1. Remove the chassis cover as described in Section C.2.

2. Remove the coverplate from the port slot where the Fast Ethernet 

Interface Module will be installed. 

The Fast Ethernet Interface Module and the 8H02-16 are 
sensitive to static discharges. Use an antistatic wrist strap and 
observe all static precautions during this procedure. Failure to 
do so could damage the module or the 8H02-16.

1742-11

Fast Ethernet
Interface Modules

Connectors