Справочник Пользователя для Cabletron Systems 8H02-16

The 8H02-16 comes with a Console Cable Kit that provides a cable and 
RJ45-to-DB9 adapter. The adapter allows the 8H02-16 RJ45 COM port to 
connect to an IBM or compatible PC running a VT series emulation 
software package. For detailed instructions regarding the connection of 
the console cable to the 8H02-16, refer to the instruction sheet provided in 
the Console Cable Kit. 

Optional adapters are available to connect the 8H02-16 to Local 
Management through a VT type terminal or a modem. Refer to the RJ45 
Console Cable Kit Instruction Sheet for installation instructions and 
adapter specifications.

The following hardware is needed to connect the 8H02-16 to the UPS:

•

An RJ45 console cable

•

An RJ45 to DB9 adapter

To connect a cable from the UPS to the 8H02-16 COM port, perform the 
following steps:

1. Plug the RJ45 console cable into the 8H02-16 COM port.

2. Plug the other end of the console cable into the adapter and connect the 

adapter to the UPS.

With the cable connection complete and with a valid IP address entered 
into the 8H02-16 through Local Management (see Chapter 6) or through 
Runtime IP Address Discovery (refer to Section 5.5, Runtime IP 
Address Discovery), use one of the following management tools to 
configure the 8H02-16 COM port for the UPS application:

•

8H02-16 Local Management through Telnet. The General 
Configuration screen described in Chapter 6, Section 6.6.12, provides 
the instructions to set up the COM port for the UPS application.

•

Graphical user interfaces (GUIs) provided by SPECTRUM Element 
Manager for Windows, SPECTRUM Portable Management 
Applications (SPMAs), or SPECTRUM software packages.