Справочник Пользователя для Cabletron Systems 8H02-16

The password used to access Local Management at the Password Screen 
must have Super-User access in order for edits in the SNMP Community 
Names screen to take effect. Using a password with Read-Only or 
Read-Write access does not allow the user to edit the SNMP Community 
Names screen.

To establish community names, proceed as follows:

1. Use the arrow keys to highlight the Community Name field adjacent 

to the selected access level.

2. Enter the password in the field (maximum 31 characters).

3. Press ENTER.

4. Repeat steps 1 through 3 to modify the other community names.

5. Use the arrow keys to highlight SAVE at the bottom of the screen and 

press ENTER. The message “SAVED OK” appears. The community 
names are saved to memory and their access modes implemented.

6. To exit the screen, use the arrow keys to highlight RETURN and press 

ENTER.

Any community name assigned in the SNMP Community 
Names screen is a password to its corresponding level of 
access to Local Management. The community name assigned 
Super-User access is the only one that gives the user complete 
access to Local Management.

Exiting without saving causes a “NOT SAVED?” message to 
display above the SAVE command. Edits will be lost if they are 
not saved before exiting.