Справочник Пользователя для Cabletron Systems 8H02-16

[Ports 9-14] (Read-only)

When the Full Duplex Configuration screen appears, the current operation 
mode and status information are displayed for the first eight ports. This 
field allows the user to step to a second screen for the same type of 
information for ports 9 through 14. While on the second screen, this field 
changes to [Ports 1-8] so the user can navigate back to the first screen. 
The user can change the Operation Mode fields while in either the first or 
second screen.

To set one Ethernet port to either Standard Ethernet or Full Duplex 
operating mode, proceed as follows:

1. Use the arrow keys to highlight the Operation Mode field adjacent to 

the number of the port that you plan to change.

2. Press the SPACE bar until the appropriate mode (FULL DUPLEX or 

STANDARD ENET) appears in the field.

3. Use the arrow keys to highlight the SAVE command on the bottom 

line of the screen.

4. Press ENTER. The message “SAVED OK” is displayed. 

To set all 14 Ethernet ports for Full Duplex or Standard Ethernet, proceed 
as follows:

1. Use the arrow keys to highlight the SET ALL PORTS field.

2. Press the SPACE bar until you see [FULL DUPLEX] or 

[STANDARD ENET].

3. Use the arrow keys to highlight the SAVE command on the bottom 

line of the screen.

4. Press ENTER. The message “SAVED OK” is displayed.

The Operation Mode for

 

the first 8 ports can be changed on the 

first screen. To display the Operation Mode for Ports 9 through 
14, use the arrow keys to highlight the [Ports 9-14] field and 
press ENTER.