Справочник Пользователя для Cabletron Systems 8H02-16

Chapter 6: Local Management

Use this field to set the active technology. This field toggles between 
100Base-FX and 100Base-FXFD (full duplex). To set the active 
technology through Local Management, proceed as follows:

1. Use the arrow keys to highlight the Desired Operational Mode field.

2. Use the SPACE bar to select 100Base-FX or 100Base-FXFD (full 

duplex). 

3. Press ENTER. The port now operates in the chosen mode. 

4. Use the arrow keys to highlight the SAVE command. Press ENTER. 

The message “SAVED OK” appears and Local Management saves the 
changes to memory.

In normal operation, a port (15 or 16) with an FE-100TX interface 
automatically establishes a link with the device at the other end of the 
segment and no user setup is required. Section 6.14.4 and Section 6.14.5 
provide instructions for manually configuring the port with an FE-100TX 
installed.

Use this field to set the active technology. This field steps between 
Auto-Negotiation, 10Base-T, 10Base-TFD (full duplex), 100Base-TX, 
and 100Base-TXFD (full duplex). If Auto-Negotiation is selected, the 
FE-100TX automatically sets the active technology. To manually set the 
active technology through Local Management, proceed as follows:

1. Use the arrow keys to highlight the Desired Operational Mode field.

2. Use the SPACE bar to select the desired mode. Press ENTER. If any 

mode other than Auto-Negotiation is selected, the port only operates 
in the chosen mode and auto-negotiation is disabled. 

3. Use the arrow keys to highlight the SAVE command. Press ENTER. 

The message “SAVED OK” appears and Local Management saves the 
changes to memory. The selected mode is displayed in both the 
Desired Operational Mode field and the Current Operational Mode 
field.