Справочник Пользователя для Emerson Process Management 3420
6
Daniel Ultrasonic Meter reference manuals
Section 1: Introduction
Reference, Installation, and Operations Manual
June 2013
3-9000-743 Rev S
Continuous Flow Analysis
Continuous Flow Analysis provides operators and technicians with critical ultrasonic meter
diagnostic capabilities with meter status alerts when problems occur with:
diagnostic capabilities with meter status alerts when problems occur with:
•
Abnormal profile
•
Blockage
•
Internal bore buildup
•
Liquids present in the gas meter
•
Reverse Flow
•
Speed of Sound comparison error
1.4
Daniel Ultrasonic Meter reference manuals
All technical manuals are available for download in Adobe® PDF format from the Daniel website:
Table 1-2 Daniel reference manuals
Part Number
Title
P/N 3-9000-729
Ultrasonic Extractor Tool Operation Manual (Older “M” and “N”mounts)
P/N 3-9000-740
Daniel Ultrasonic Gas Flow Meter Reference, Installation and Operations Manual (Applies to
Mark II meter)
Mark II meter)
P/N 3-9000-763
Daniel MeterLink Ultrasonic Meter Software Quick Start Manual
P/N 3-9000-743
Daniel Ultrasonic Gas Flow Meter Mark III Electronics Reference, Installation and Operations
Manual (This manual.)
Manual (This manual.)
P/N 3-9000-744
Ultrasonic Split Clamp Extractor Tool Operation Manual (Newer “J” &“K” Mounts)
P/N 3-9000-746
Daniel Ultrasonic Mark III Electronic Upgrade Kit Instructions
P/N 3-9000-749
Daniel Ultrasonic Mark III Option Board “A” Field Installation Procedure (Series 100 Options
Boards)
Boards)
P/N 3-9000-751
Daniel Transducer Installation and Upgrade Procedure
P/N 3-9000-754
HART Field Device Specification Guide: Daniel Gas Ultrasonic Meters
Daniel CUI version 4.21 is the final version that supports Daniel Mark II Gas Ultrasonic meters. If you are
communicating with a Daniel Ultrasonic Mark II Gas Flow Meter, you do not need to uninstall version 4.21 or
earlier versions of Daniel CUI before installing MeterLink. Version 4.21 and earlier versions of Daniel CUI should
not be run simultaneously with MeterLink.
communicating with a Daniel Ultrasonic Mark II Gas Flow Meter, you do not need to uninstall version 4.21 or
earlier versions of Daniel CUI before installing MeterLink. Version 4.21 and earlier versions of Daniel CUI should
not be run simultaneously with MeterLink.