Справочник Пользователя для Sony DCR-HC85E
Recor
d
ing
Recording
47
3
Touch .
The last scene of the most recent recording
is played back for about 5 seconds, and the
camcorder enters the standby mode at the
point where the last recording has finished.
is played back for about 5 seconds, and the
camcorder enters the standby mode at the
point where the last recording has finished.
To cancel the operation
Touch [CANCEL].
b
Note
• The END SEARCH function will not work correctly
when there is a blank section between recorded
sections on the tape.
sections on the tape.
z
Tip
• You can do this operation also by selecting [END
SEARCH] in the menu setting. When PLAY/EDIT
mode is selected, you can do this operation
by selecting [END SEARCH] short-cut on
(p. 61).
mode is selected, you can do this operation
by selecting [END SEARCH] short-cut on
(p. 61).
Searching manually – EDIT
SEARCH
SEARCH
You can search for the start point while
viewing the pictures on the screen. The sound
is not played back during the search.
viewing the pictures on the screen. The sound
is not played back during the search.
1
Slide the POWER switch to select the
CAMERA-TAPE mode.
CAMERA-TAPE mode.
2
Touch .
3
Keep touching
(to go
backward)/
(to go forward) and
release it at the point where you want
the recording to start.
the recording to start.
Reviewing the most recently
recorded scenes – Rec review
recorded scenes – Rec review
You can view a few seconds of the scene
recorded just before you stopped the tape.
recorded just before you stopped the tape.
1
Slide the POWER switch repeatedly to
select the CAMERA-TAPE mode.
select the CAMERA-TAPE mode.
2
Touch .
3
Touch
once.
The last few seconds of the most recently
recorded scene are played back. Then, your
camcorder is set to the standby mode.
recorded scene are played back. Then, your
camcorder is set to the standby mode.
END SEARCH
EXECUTING
CANCEL
0:00:00
1
60min
Appears only with a
cassette with
Cassette Memory
cassette with
Cassette Memory
0:00:00
STBY
60min
EDIT
0:00:00
STBY
60min
EDIT