Справочник Пользователя для Mitsubishi Electronics DX-PC25EA
- 42 -
(h) Initial Setup tab
When you click the [Initial Setup] tab on the [Menu Setting] window, you can make basic settings.
[HDD]
---------- When you click the [HDD Setting] button, the [HDD Setting] window will appear. You
can make settings related to HDD repeat recording, HDD repeat playback, and IM-
check playback using this window.
check playback using this window.
[Audio Recording]
---------- You can make settings related to audio recording.
[Rear Terminal]
---------- When you click the [Rear Terminal Setting] button, the [Rear Terminal Setting] window
will appear. You can make settings related to Mode Out, button tone, buzzer, HDD
remaining capacity, emergency recording duration, and Call Out.
remaining capacity, emergency recording duration, and Call Out.
[Communication]
---------- When you click the [RS-232C Setting] button, the [RS-232C Setting] window will ap-
pear. You can make settings related to remote control of the digital recorder by a com-
munication device (such as a personal computer), transfer rate, etc. using this window.
munication device (such as a personal computer), transfer rate, etc. using this window.
When you click the [LAN Setting] button, the [LAN Setting] window will appear. You can
set the IP address, sub net mask, gateway, service port, various notifications, and retry
interval of the digital recorder using this window.
set the IP address, sub net mask, gateway, service port, various notifications, and retry
interval of the digital recorder using this window.
[Language]
---------- You can select Japanese or English as the menu language of the digital recorder.