Справочник Пользователя для Mitsubishi Electronics 148 Series

Review the important safety, installation, and oper-

ating information at the beginning of this book.
Choose a location for your TV.

Allow at least four inches of space on all sides 

•

of the TV to help prevent overheating.  Over-
heating may cause premature failure of the TV.
Avoid locations where light may reflect off the 

•

screen or where the TV is exposed to direct 
sunlight.
Refer also to 

•

“Installation Notes,” page 5.

Install the batteries in the remote control.  See 

this 

page for instructions.  See page 30 for more on use 
of the remote control.
Plug your TV into a power outlet.  The green LED on 

the front of the TV will start blinking rapidly.  After 
the green LED stops blinking, press the 

POWER key to 

power on the TV.
When the 

Welcome screen appears the first time 

you power on the TV, select a language for TV 
menus.  You can later change the language through 
the 

Setup menu.

Connect your audio/video (A/V) devices to the TV 

and perform initial setup.

See chapter 3, “TV Connections,” for connec-

•

tion diagrams.
See the following pages for initial TV setup and 

•

use of the Auto Input Sensing feature.
To connect the TV to a personal computer, see 

•

“Using the TV with a Personal Computer,” page 
18.
See chapter 6, “NetCommand IR Control,” to 

•

perform NetCommand IR “learning” to set up 
control of your home theater.
To set up NetCommand HDMI control of CEC-

•

enabled devices, see Appendix E.

Mitsubishi recommends you perform a channel 

scan for channels received on 

ANT 1 and ANT 2.  

See “Initial TV Setup” page 14.
You can now start watching TV or you can perform 

additional setup and customization through the TV 
menus.

Remove the remote control’s back cover by 

gently pressing in the tab and lifting off the 
cover.

Load the batteries, making sure the polarities 

(+) and (-) are correct.  For best results, insert 
the negative (-) end first.

Snap the cover back in place.

Power on the TV for the first time.

Press 

   to select either 

English or Spanish 

for all menus.  You can later change the lan-
guage selection through the 

guage menu.  See page 44.

Turning the TV On or Off
To turn the TV on or off, point the remote control at the 
front of the TV and press the 

POWER button.  Alterna-

tively, press the 

POWER button on the TV’s control panel.