Справочник Пользователя для Mitsubishi Electronics 148 Series

Скачать
Страница из 96
 
3. TV Connections 
25
VCR to an Antenna or 
Wall Outlet Cable
Required: Two-way RF splitter, two coaxial cables, right 
and left analog audio cables, either S-video or compos-
ite video cable.
Connect the incoming cable or antenna to 
1. 
IN on the 
RF splitter.
Connect one coaxial cable from 
2. 
OUT on the RF 
splitter to 
ANTENNA IN on the VCR back panel.
Connect one coaxial cable from 
3. 
OUT on the RF 
splitter to 
ANT 1 on the TV main panel.
Connect either an S-Video or composite video 
4. 
cable from 
VIDEO OUT on the VCR back panel to a 
VIDEO composite or S-VIDEO jack on the TV main 
panel.  
Connect only one type of video cable
S-Video is recommended, if available.
To use the TV speakers with the VCR, connect left 
5. 
(white) and right (red) audio cables from 
AUDIO OUT 
on the VCR to the associated 
AUDIO L and R jacks 
on the TV main panel.  If your VCR is mono (non-
stereo), connect only the white (left) cable.
HDMI 
IR- 
Output / External 
Controller Input 
S-VIDEO 
VIDEO 
AUDIO 
INPUT3 
INPUT2  INPUT1 
AVR AUDIO 
OUTPUT 
AUDIO 
Pb 
Y / VIDEO 
Pr 
ANT2/AUX 
ANT1/MAIN 
DIGITAL 
 AUDIO 
OUTPUT 
NetCommand    
) i 0 
8 0 
1   /   
p 0 
2 7   / 
  p 
0 8 
4   /   i 
0 8 
4 ( 
AUDIO 
DVI/PC 
AUDIO 
S-VIDEO 
S-VIDEO 
VIDEO 
AUDIO 
VIDEO 
ANT1/MAIN 
ANT1/MAIN 
S-VIDEO 
OUT 
VIDEO 
OUT 
AUDIO OUT 
ANTENNA 
IN 
VCR 
TV main panel
2. 
2. 
1. 
4.
4.
5.
5.
3. 
3. 
Incoming 
cable
VCR to a Cable Box (Audio & Video)
Required:  Two-way RF splitter, three coaxial cables, 
right and left audio cables, S-Video or composite video 
cable, plus video and audio cables required to connect 
the TV to the cable box.
Connect the incoming cable to 
1. 
IN on the RF splitter.
Connect one coaxial cable from 
2. 
OUT on the RF 
splitter to 
CABLE IN on the cable box.
Connect one coaxial cable from 
3. 
OUT on the RF 
splitter to 
ANT 1 on the TV main panel.
Connect one coaxial cable from 
4. 
OUT on the cable 
box to 
ANTENNA IN on the VCR back panel.
OUT 
IN 
HDMI 
IR- 
Output / External 
Controller Input 
S-VIDEO 
VIDEO 
AUDIO 
INPUT3 
INPUT2  INPUT1 
AVR AUDIO 
OUTPUT 
AUDIO 
Pb 
Y / VIDEO 
Pr 
ANT2/AUX 
ANT1/MAIN 
DIGITAL 
 AUDIO 
OUTPUT 
NetCommand    
) i 0 
8 0 
1   /   
p 0 
2 7   / 
  p 
0 8 
4   /   i 
0 8 
4 ( 
AUDIO 
DVI/PC 
AUDIO 
S-VIDEO 
S-VIDEO 
VIDEO 
AUDIO 
VIDEO 
ANT1/MAIN 
ANT1/MAIN 
 
S-VIDEO 
OUT 
VIDEO 
OUT 
AUDIO OUT 
ANTENNA 
IN 
6. 
6. 
7. 
7. 
VCR 
TV 
main 
panel
2. 
2. 
1. 
4. 
3. 
3. 
Incoming 
cable 
4. 
5. 
Audio and 
video from 
cable box 
to TV 
Cable 
box 
Figure 9.  Connecting a VCR to a cable box
Connect the cable box outputs to the TV as shown 
5. 
in one of the options listed below.  This connection 
allows the TV to receive the best available signal 
directly from the cable box.
•  Figure 1, page 22:  Component video output to 
the TV’s
 Y Pb Pr jacks; analog stereo audio to 
the associated 
AUDIO jacks.
Figure 2, page 22:  HDMI output to the TV’s 
HDMI jack.
Figure 4, page 23:  S-Video output to the TV’s 
INPUT 3 S-VIDEO jack; analog stereo audio to 
the 
INPUT 3 AUDIO jacks.
Figure 8.  Connecting a VCR to allow recording from an 
antenna source.